International norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE
European Union Norms and produced under ISO 9001: 2008 QMS
• Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
• Whilst Normal Operation, displays IN/OUT Counters and Security
Level on LCD without abbreviations so that Security Staff can easily
understand
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat
Objects Considered Dangerous by International Security Authorities. Can
detect when tested both individually and in combination.
• Displays the Detected Metal Objects location on Both Side Panels
LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage
and/or wrapped. Impossible for such threat objects to pass through the
WTMD without causing an alarm.
• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• Detects Metals regardless their orientation
• 10 sensitivity levels, 246 adjustable sensitivity steps at each
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter
with green, yellow, red LEDs easily allows sight from distance
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Auto Calibration (Automatically calibrates itself up to
Environmental Conditions) No Set Up Changes necessary when relocated
and/or new Magnetic Objects brought Near-By
• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
• Green/Red bicolor traffic through LEDs easily allows sight from
distance 60 Persons/Minute and LED Alarm Indicators on side panels
• Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
• Special Environmental Magnetic Interference Display Menu
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
• IP 40-41 Protection Level (EN 60529)
• Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
• Interference free Operation from other Electronic Devices and Does
Not affect other Electronic Equipments. Necessary filtering precautions
have been taken.
• Four-digit changeable digital Pin Code
• Automatic Failure Display Function on LCD
• Reloading the factory default settings by one-touch button
• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm
Distance Constant Metals and 150 cm distance Moving Metallic Objects
• Audio-Visual alarms are noticeable at a range of 2 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• SCADA remote data communication and Networking of Multiple Metal Detectors - Send - Change settings by PC – Software Optional
• Manufactured using the latest technology components and Resistant to Vibration & Impact
•Weight: 54 kg
•Gross weight: 62 kg
•Operating voltage:70VAC – 270VAC / 50Hz - 60Hz
•Power: 10W Stand By- 20W (Alarm)
•Package Dimensions (W x H x L): Box 1: 620 x230 x 2265mm Box 2: 225 x 235 x 790 mm
•Ambient Temperature: -20°C to +70°
International
norms (NILECJ-0601 L1-5/IP55 WEATHERPROOF/ /EN60950 Class1) In
conformity with CE European Union Norms and produced under ISO 9001:
2008 QMS
• IP 55 WEATHERPROOF– OUTDOOR OPERATION (EN 60529)
• Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
• Separate Zone Sensitivity Setting Feature
• Whilst Normal Operation, displays IN/OUT Counters and Security
Level on LCD without abbreviations so that Security Staff can easily
understand
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat
Objects Considered Dangerous by International Security Authorities. Can
detect when tested both individually and in combination and Gives
Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
• SMART DETECTOR – Fast and consistent calibration, Automatic
Sensitivity Program selects the correct sensitivity for a specific
weapon or a recognized test object
• Displays the Detected Metal Objects location on Both Side Panels
LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage
and/or wrapped. Impossible for such threat objects to pass through the
WTMD without causing an alarm.
• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• Detects Metals regardless their orientation
• 20 sensitivity levels, 246 adjustable sensitivity steps at each,
Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter
with green, yellow, red LEDs easily allows sight from distance
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Auto Calibration (Automatically calibrates itself up to
Environmental Conditions) No Set Up Changes necessary when relocated
and/or new Magnetic Objects brought Near-By
• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
• Green/Red bicolor traffic through LEDs easily allows sight from
distance 60 Persons/Minute and LED Alarm Indicators on side panels
• Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
• Special Environmental Magnetic Interference Display Menu
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
• Adjustable Alarm Duration (Detection Speed Regardless Alarms)
• Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
• IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
• Interference free Operation from other Electronic Devices and Does
Not affect other Electronic Equipments. Necessary filtering precautions
have been taken
• Four-digit changeable digital Pin Code and Mechanical Lock
• Automatic Failure Display Function on LCD
• Reloading the factory default settings by one-touch button
• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm
Distance Constant Metals and 200 cm distance Moving Metallic Objects
• BATTERY OPERATION where there is no Mains Supply.
• Audio-Visual alarms are noticeable at a range of 4 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• SCADA Remote Control Set - Send Receive- Change settings by PC,
Audio-Visual alarms can be monitored Real Time by PC and can be logged
into Hard Disk Software Optional
• ABS Protective Footers for increased protection and strong fixing – Optional
• STANDARD ABS Rain Shelter on Top
Weight : 58 kg
Gross weight: 64 kg
Operating voltage :70 VAC – 270 VAC 50Hz-60Hz
Power :10W Stand By- 20W (alarm)
Package (W x H x L):
Box 1: 645 x255 x 2290 mm Box 2: 240 x 250 x 805 mm Box 3: 600 x 150 x 850 mm
Ambient temperature: -20°C to +70° C
Conforms
to European Norms and in Compliance with NILECJ-0601.00 L1-5 Standard
and produced under ISO 9001: 2008 QMS (Chinese Metal Detectors comply
their own National Norms Only)
• We do not use China Made Production Input. (Chinese Equipment
Sockets/Connectors and Electronic Circuitry is rather low quality and in
most cases Exporter/Manufacturer and the Model Number Serial No is not
even Clear and probably without a proper User’s Manual)
•Certified Safe regarding Electromagnetic Field-EMC, IP Protection
Levels, International Health and Safety Norms ( Certification could be
Potato Stamp)
• No Set Up Change is Necessary regarding Winter/Summer Seasnal
Adjustments and Resistant to Vibration & Impact (Chinese Equipment
my require Adjustments as per Temperature Changes)
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat
Objects Considered Dangerous by International Security Authorities. Can
detect when tested both individually and in combination.
• Give Alarm to all threat objects detected at different Alarm
Zones. (Chinese equipment detects the Largest Threat Objects while
others are not Pinpointed)
• Detects all threat objects even concealed, hidden with camouflage
and/or wrapped. Impossible for such threat objects to pass through the
WTMD without causing an alarm.
• No Interferences between Zones and No False Alarms (Chinese equipment does not operate like this once detect and then not)
• Multi-Zone - 6 Real Detection Zones(Up/Middle/Down and Left/Right)
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• 10 sensitivity levels, 246 adjustable sensitivity steps at each
• Auto Calibration (Automatically calibrates itself up to
Environmental Conditions) No Set Up Changes necessary when relocated
and/or new Magnetic Objects brought Near-By
• Human Health friendly Very Low Frequency VLF technology, No
affects to Pace Makers, Pregnant and Magnetic Media (Certification with
Chinese Equipment should be carefully checked)
• Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter
with green, yellow, red LEDs easily allows sight from distance
• Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.
• Five Digit Incoming Counter (Visible/Invisible)
• IR Pass Sensor ON/OFF Selection
• Four-digit changeable digital Pin Code
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• Reloading the factory default settings by one-touch button
• Easy programming and monitoring with wide LCD display
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• IP 20 Protection Level (EN 60529)
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm
Distance Constant Metals and 150 cm distance Moving Metallic Objects
• Audio-Visual alarms are noticeable at a range of 2 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations.
• Weight: 51 kg
• Gross weight: 60 kg
• Operating voltage:70VAC – 270VAC / 50Hz - 60Hz
• Power: 10W Stand By- 20W (Alarm)
• Package Dimensions (W x H x L): Box 1: 560 x225 x 2270 mm Box 2: 225 x 235 x 790 mm
• Ambient Temperature: -20°C to +70°
International
norm (NILECJ-0601-0602/NIJ/EN60950 Class1/IP 44 In conformity with CE
European Union Norms and produced under ISO 9001: 2008 QMS and ECAC DOC
30 STANDADRD 2 COMPLIANCE
• Multi-Zone – 9 Real Detection Zones (15 Distinct Detection Zones –
Divided Scanning Area and properly displayed Zone Led Indicators with
Special Coil Geometry)
• Separate Zone Sensitivity Setting Feature
• Standard Preset JAILHOUSE/AIRPORT/MILITARY/POLICE PREMISES,SHOPPING MALL Security Modes
• Whilst Normal Operation, displays IN/OUT Counters and Security
Level on GRAPHICAL LCD without abbreviations so that Security Staff can
easily understand
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat
Objects Considered Dangerous by International Security Authorities. Can
detect when tested both individually and in combination and Gives
Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
• SMART DETECTOR – Fast and consistent calibration, Automatic
Sensitivity Program selects the correct sensitivity for a specific
weapon or a recognized test object
• Displays the Detected Metal Objects location on Both Side Panels
LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage
and/or wrapped. Impossible for such threat objects to pass through the
WTMD without causing an alarm.
• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• Detects Metals regardless their orientation
• 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, 5 Preset Programs
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter
with green, yellow, red LEDs easily allows sight from distance
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Auto Calibration (Automatically calibrates itself up to
Environmental Conditions) No Set Up Changes necessary when relocated
and/or new Magnetic Objects brought Near-By
• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
• Green/Red bicolor traffic through LEDs easily allows sight from
distance 60 Persons/Minute and LED Alarm Indicators on side panels
• Adjustable Random Alarm possibilities to give alarm for clean visitors at a selected ratio.
• Record Statistics of Operation Duration, Number of Visitors and Alarms (Real/Random Alarms Separately)
• Special Environmental Magnetic Interference Display Menu
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
• Adjustable Alarm Duration (Detection Speed Regardless Alarms)
• Reloading the factory default settings by one-touch button Five
Digit Incoming/Outgoing &Alarm Counters (Visible/Invisible) – Reset
• IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
• Interference free Operation from other Electronic Devices and Does
Not affect other Electronic Equipments. Necessary filtering precautions
have been taken
• Four-digit changeable digital Pin Code and Mechanical Lock
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm
Distance Constant Metals and 200 cm distance Moving Metallic Objects
• Installation and Operation without interference between two detectors up to a distance of min. 5 cm
• Audio-Visual alarms are noticeable at a range of 4 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Magnetic Field inside all passage area is 0,1 Gauss
• All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use. OPTIONALS
• SCADA Remote Control Set - Send Receive- Change settings by PC,
Audio-Visual alarms can be monitored Real Time by PC and can be logged
into Hard Disk Software Optional
• REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed
Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD
Card ~30.000 Images Optional
• IRDA – Remote Control Unit (Optional)
• Detection Functions has been tested with ECAC/NIJ/TSA Test Kits and Certified
International
norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE
European Union Norms and produced under ISO 9001: 2008 QMS
Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
Separate Zone Sensitivity Setting Feature
Whilst Normal Operation, displays IN/OUT Counters and Security Level
on LCD without abbreviations so that Security Staff can easily
understand
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat
Objects Considered Dangerous by International Security Authorities. Can
detect when tested both individually and in combination and Gives
Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
SMART DETECTOR – Fast and consistent calibration, Automatic
Sensitivity Program selects the correct sensitivity for a specific
weapon or a recognized test object
Displays the Detected Metal Objects location on Both Side Panels
LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
Detects all threat objects even concealed, hidden with camouflage
and/or wrapped. Impossible for such threat objects to pass through the
WTMD without causing an alarm.
No Interferences between Zones and No False Alarms
Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
Detects Metals regardless their orientation
20 sensitivity levels, 246 adjustable sensitivity steps at each,
Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs
Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
Auto Calibration (Automatically calibrates itself up to
Environmental Conditions) No Set Up Changes necessary when relocated
and/or new Magnetic Objects brought Near-By
Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
Green/Red bicolor traffic through LEDs easily allows sight from
distance 60 Persons/Minute and LED Alarm Indicators on side panels
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
Special Environmental Magnetic Interference Display Menu
Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
Adjustable Alarm Duration (Detection Speed Regardless Alarms)
IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
IP 44 Protection Level (EN 60529)
Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
Interference free Operation from other Electronic Devices and Does
Not affect other Electronic Equipments. Necessary filtering precautions
have been taken
Four-digit changeable digital Pin Code and Mechanical Lock
Automatic Failure Display Function on LCD
Reloading the factory default settings by one-touch button
Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
4 Menu Languages, Standard menu in English, German, Spanish and Turkish
Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm
Distance Constant Metals and 150 cm distance Moving Metallic Objects
Installation and Operation without interference between two detectors up to a distance of min. 5 cm
Audio-Visual alarms are noticeable at a range of 4 meters
Micro-Processor Settings does not change when there is an electricity cut-off
All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
SCADA Remote Control Set - Send Receive- Change settings by PC,
Audio-Visual alarms can be monitored Real Time by PC and can be logged
into Hard Disk Software Optional
REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors
Pictures/All Visitors pictures or video with Time-Stamp to SD Card
~30.000 ImagesOptional
•Weight: 56 kg
•Gross weight: 64 kg
•Operating voltage:70VAC – 270VAC / 50Hz - 60Hz ? Power: 10W Stand By- 20W (Alarm)
•Package Dimensions (W x H x L): Box 1: 620 x230 x 2265 mm Box 2: 790 x 230 x 400 mm
•Ambient Temperature: -20°C to +70°
ELEKTRAL METAL DETECTOR
International
norms (NILECJ-0601 L1-5/IP40-41/EN60950 Class1) In conformity with CE
European Union Norms and produced under ISO 9001: 2008 QMS
Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
Whilst Normal Operation, displays IN/OUT Counters and Security Level
on LCD without abbreviations so that Security Staff can easily
understand
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat
Objects Considered Dangerous by International Security Authorities. Can
detect when tested both individually and in combination.
Displays the Detected Metal Objects location on Both Side Panels
LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
Detects all threat objects even concealed, hidden with camouflage
and/or wrapped. Impossible for such threat objects to pass through the
WTMD without causing an alarm.
No Interferences between Zones and No False Alarms
Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
Detects Metals regardless their orientation
10 sensitivity levels, 246 adjustable sensitivity steps at each
Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
Auto Calibration (Automatically calibrates itself up to
Environmental Conditions) No Set Up Changes necessary when relocated
and/or new Magnetic Objects brought Near-By
Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
Green/Red bicolor traffic through LEDs easily allows sight from
distance 60 Persons/Minute and LED Alarm Indicators on side panels
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
Special Environmental Magnetic Interference Display Menu
Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
IP 40-41 Protection Level (EN 60529)
Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero.
Interference free Operation from other Electronic Devices and Does
Not affect other Electronic Equipments. Necessary filtering precautions
have been taken.
Four-digit changeable digital Pin Code
Automatic Failure Display Function on LCD
Reloading the factory default settings by one-touch button
Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
4 Menu Languages, Standard menu in English, German, Spanish and Turkish
Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm
Distance Constant Metals and 150 cm distance Moving Metallic Objects
Audio-Visual alarms are noticeable at a range of 2 meters
Micro-Processor Settings does not change when there is an electricity cut-off
All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
SCADA remote data communication and Networking of Multiple Metal Detectors - Send - Change settings by PC – Software Optional
Manufactured using the latest technology components and Resistant to Vibration & Impact
Weight: 54 kg
Gross weight: 62 kg
Operating voltage:70VAC – 270VAC / 50Hz - 60Hz
power: 10W Stand By- 20W (Alarm)
Package Dimensions (W x H x L): Box 1: 620 x230 x 2265mm Box 2: 225 x 235 x 790 mm
Ambient Temperature: -20°C to +70°
ELEKTRAL METAL DETECTOR
